Adding a Custom Set

The custom application can contain one or more custom sets. The custom set for a custom application is created a follows:

1. Repeat the steps 1-3 as mentioned in the above topic if a custom set is to be created for a new custom application. Query the required custom application if the custom set is to be created for an existing custom application.
2. Click on the Custom Set node in the nodes area and then drop it on the work area.
3. Connect this Custom Set node to the Custom Application node. You see the screen as shown below:

   

   Figure 38: Custom Set Node Property Sheet

   A node property sheet for custom set is displayed on the right pane. Properties that are highlighted with red background are mandatory.

4. Enter the following details:

   Custom Set Name: Enter the name for custom set.

   Custom Url: Enter the Url for custom set.

   Custom Display On: Select the required value from list of values. Select "Right Pane" when the custom set needs to be displayed on right side of the same screen. Select "New Window" when the custom set needs to be displayed on a new window.

5. Click Apply and then click Operations?????Commit.

In the above screen, the Custom Set is added to the Custom Application. In the similar way, the Custom Set can be added to the Workflow Enabled or Workflow Disabled application.

Figure 39: Custom Set Added to Workflow Enabled Application

Figure 40: Custom Set Added to Workflow Disabled Application